How to Adjust Orbit Saturn III Sprinkler - Simple!
Key Moments
Editorial Summary
The creator provides a tutorial on how to properly adjust Orbit Saturn III sprinkler heads to avoid breaking them. The video explains that these sprinklers feature a gray screw for adjusting travel and a silver screw for adjusting distance. Before making any adjustments, the creator recommends turning the green head all the way to the left and then all the way clockwise to the right to establish a locked set position. Using a flathead screwdriver, the user can turn the gray screw clockwise to increase the rotation angle or counterclockwise to decrease it. To manage the spray distance, the silver screw should be turned clockwise to shorten the distance or counterclockwise to lengthen it. The creator notes that the distance typically ranges from 15 to 30 feet depending on water pressure. Finally, the video demonstrates how to adjust the initial set location by lifting the head out using a notch and twisting it to a new position before dropping it back into place.
Written by TripBacon from this video's transcript.
How This Review Compares
This review is more critical than the all-time creator consensus.
Source: Our analysis of the creator's lived experience, based on what they said in this video.
Creator's Key Takeaways
I use these in the front yard last year and this year I'm putting them into the back yard
I messed up last year and didn't do it properly and broke a couple so I'll just show you how to do this properly
the spray range is about 15-30 ft
Creator's Tips & Advice
🆕New to Cruising? This Creator Addresses:
Questions This Creator Answers
Video content sourced from the creator's original upload. Watch on YouTube